Skip to main content
AZIENDA CERTIFICATA

SAMPLING POINTS

27 SAMPLING POINTS Design, construction and revamping of sampling points on industrial exhaust stacks, for all verification and control needs.

What are sampling ports?

Sampling ports, also known as nozzles or probe connections, are a mandatory element – by law – of industrial plant aspiration and filtration systems.

These are verification stations located on industrial exhaust stacks. Their function is to allow the insertion into the stack of special digital devices for analysis and verification of the airflow emitted into the atmosphere , so as to allow the control of the filtration, if necessary, of all polluting substances. Specific UNI standards regulate the suitable positions for opening these access points, which must be kept at precise minimum distances from bends in the pipes and fans to ensure the homogeneity of the flow and its components and thus allow an accurate and significant analysis.

Considerations relating to the safety of the operator carrying out the check and the need to minimize any uncertainty regarding the actual composition of the air sample taken at that point in the flow are also crucial in choosing the position where to open the sampling ports.

Application areas of sampling ports

Sampling ports are used in a vast variety of different industrial and production fields.
A partial list cannot fail to include at least the following:

Bruno Balducci srl sampling ports

At Bruno Balducci srl we are able to determine where the law requires the insertion of sampling points for the aspiration and filtration system, and to install them both on new systems and in revamping and upgrading – even in case of changes in the reference regulations – on existing filtration systems and emission stacks.